Child pages
  • geronimo-connector-1.1.xsd
Skip to end of metadata
Go to start of metadata

{scrollbar}top

Introduction

Geronimo includes a connecter container supporting both in bound and out bound Resource adapters.A Connector RAR may include Geronimo-specific configuration information in addition to the standard J2EE deployment descriptor.This is the Geronimo specific XML Schema Documentation for the Connector 1.5 deployment descriptor.The deployment descriptor must be named "META-INF/ra.xml" in the connector's RAR file.

This article is organized into the following sections : -

Geronimo Connector Schema Document

xmlsolidgeronimo-connector-1.1.xsd <?xml version="1.0" encoding="UTF-8"?> <!-- Copyright 2004 The Apache Software Foundation Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --> <xs:schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:ger="http://geronimo.apache.org/xml/ns/j2ee/connector-1.1" xmlns:naming="http://geronimo.apache.org/xml/ns/naming-1.1" xmlns:sys="http://geronimo.apache.org/xml/ns/deployment-1.1" targetNamespace="http://geronimo.apache.org/xml/ns/j2ee/connector-1.1" xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified"> <xs:import namespace="http://geronimo.apache.org/xml/ns/naming-1.1" schemaLocation="geronimo-naming-1.1.xsd"/> <xs:import namespace="http://geronimo.apache.org/xml/ns/deployment-1.1" schemaLocation="geronimo-module-1.1.xsd"/> <xs:import namespace="http://www.w3.org/XML/1998/namespace" schemaLocation="http://www.w3.org/2001/xml.xsd"/> <xs:annotation> <xs:documentation> <![CDATA[ documents using this schema should start like: <connector xmlns="http://geronimo.apache.org/xml/ns/j2ee/connector-1.1" version="1.5"> @(#)geronimo-connector_1_5.xsds ]]> </xs:documentation> </xs:annotation> <!-- **************************************************** --> <xs:element name="connector" type="ger:connectorType"> <xs:annotation> <xs:documentation> The connector element is the root element of the deployment descriptor for the resource adapter. This element includes </xs:documentation> </xs:annotation> <xs:unique name="resourceadapter-instance-name-uniqueness"> <xs:annotation> <xs:documentation> The resourceadapter-instance element must have a unique name. </xs:documentation> </xs:annotation> <xs:selector xpath="ger:resourceadapter/ger:resourceadapter-instance"/> <xs:field xpath="ger:resourceadapter-name"/> </xs:unique> <xs:unique name="connectiondefinition-instance-name-uniqueness"> <xs:annotation> <xs:documentation> The connectiondefinition-instance element must have a unique name. </xs:documentation> </xs:annotation> <xs:selector xpath="ger:resourceadapter/ger:outbound-resourceadapter/ger:connection-definition/ ger:connectiondefinition-instance"/> <xs:field xpath="ger:name"/> </xs:unique> <xs:unique name="admin-object-instance-name-uniqueness"> <xs:annotation> <xs:documentation> The admin-object-instance element must have a unique name. </xs:documentation> </xs:annotation> <xs:selector xpath="ger:adminobject/ger:adminobject-instance"/> <xs:field xpath="ger:message-destination-name"/> </xs:unique> </xs:element> <!-- **************************************************** --> <xs:complexType name="adminobjectType"> <xs:annotation> <xs:documentation> reference back into standard dd </xs:documentation> </xs:annotation> <xs:sequence> <xs:element name="adminobject-interface" type="ger:fully-qualified-classType"> <xs:annotation> <xs:documentation> believe it or not, there are no uniqueness constraints on admin object intf or class </xs:documentation> </xs:annotation> </xs:element> <xs:element name="adminobject-class" type="ger:fully-qualified-classType"> <xs:annotation> <xs:documentation>reference back into the standard dd</xs:documentation> </xs:annotation> </xs:element> <xs:element name="adminobject-instance" type="ger:adminobject-instanceType" minOccurs="0" maxOccurs="unbounded"/> </xs:sequence> </xs:complexType> <xs:complexType name="adminobject-instanceType"> <xs:sequence> <xs:element name="message-destination-name" type="xs:string"> <xs:annotation> <xs:documentation>unique name for admin object instance. Used in object name of gbean for it. Matches message-destination-name in ejb-jar.xml assembly descriptor. </xs:documentation> </xs:annotation> </xs:element> <xs:element name="config-property-setting" type="ger:config-property-settingType" minOccurs="0" maxOccurs="unbounded"/> </xs:sequence> </xs:complexType> <!-- **************************************************** --> <xs:complexType name="config-property-settingType"> <xs:annotation> <xs:documentation> The config-property-settingType contains a name-value pair for a config-property or required-config-property </xs:documentation> </xs:annotation> <xs:simpleContent> <xs:extension base="xs:string"> <xs:attribute name="name" type="xs:string" use="required"/> </xs:extension> </xs:simpleContent> </xs:complexType> <!-- **************************************************** --> <xs:complexType name="connection-definitionType"> <xs:annotation> <xs:documentation> The connection-definitionType defines a set of connection interfaces and classes pertaining to a particular connection type. This also includes configurable properties for ManagedConnectionFactory instances that may be produced out of this set. The name element uniquely identifies this instance </xs:documentation> </xs:annotation> <xs:sequence> <xs:element name="connectionfactory-interface" type="ger:fully-qualified-classType"> <xs:annotation> <xs:documentation> connectionfactory-interface is unique in ra.xml so is used to index into ra.xml </xs:documentation> </xs:annotation> </xs:element> <xs:element name="connectiondefinition-instance" type="ger:connectiondefinition-instanceType" minOccurs="0" maxOccurs="unbounded"/> </xs:sequence> </xs:complexType> <xs:complexType name="connectiondefinition-instanceType"> <xs:sequence> <xs:element name="name" type="xs:string"/> <xs:element name="implemented-interface" type="ger:fully-qualified-classType" minOccurs="0" maxOccurs="unbounded"> <xs:annotation> <xs:documentation> Additional interfaces implemented by the connectionfactory, used by the application </xs:documentation> </xs:annotation> </xs:element> <xs:element name="config-property-setting" type="ger:config-property-settingType" minOccurs="0" maxOccurs="unbounded"/> <!-- <xs:choice>--> <xs:element name="connectionmanager" type="ger:connectionmanagerType"> </xs:element> <!-- <xs:element name="connectionmanager-ref" type="xs:string"/>--> <!-- </xs:choice>--> </xs:sequence> </xs:complexType> <!-- **************************************************** --> <xs:complexType name="connectionmanagerType"> <xs:annotation> <xs:documentation> The ConnectionManager configuration. </xs:documentation> </xs:annotation> <xs:sequence> <xs:element name="container-managed-security" type="ger:emptyType" minOccurs="0"/> <xs:choice minOccurs="0"> <xs:element name="no-transaction" type="ger:emptyType"/> <xs:element name="local-transaction" type="ger:emptyType"/> <xs:element name="xa-transaction" type="ger:xatransactionType"/> <xs:element name="transaction-log" type="ger:emptyType"/> </xs:choice> <xs:choice> <xs:element name="no-pool" type="ger:emptyType"/> <xs:element name="single-pool" type="ger:singlepoolType"/> <xs:element name="partitioned-pool" type="ger:partitionedpoolType"/> </xs:choice> </xs:sequence> </xs:complexType> <xs:complexType name="xatransactionType"> <xs:sequence> <xs:element name="transaction-caching" type="ger:emptyType" minOccurs="0"/> <xs:element name="thread-caching" type="ger:emptyType" minOccurs="0"/> </xs:sequence> </xs:complexType> <xs:complexType name="singlepoolType"> <xs:sequence> <xs:element name="max-size" type="xs:int" minOccurs="0"/> <xs:element name="min-size" type="xs:int" minOccurs="0"/> <xs:element name="blocking-timeout-milliseconds" type="xs:int" minOccurs="0"/> <xs:element name="idle-timeout-minutes" type="xs:int" minOccurs="0"/> <xs:choice> <xs:element name="match-one" type="ger:emptyType"/> <xs:element name="match-all" type="ger:emptyType"/> <xs:element name="select-one-assume-match" type="ger:emptyType"/> </xs:choice> </xs:sequence> </xs:complexType> <xs:complexType name="partitionedpoolType"> <complexContent> <extension base="ger:singlepoolType"> <xs:sequence> <xs:element name="partition-by-subject" type="ger:emptyType" minOccurs="0"/> <xs:element name="partition-by-connectionrequestinfo" type="ger:emptyType" minOccurs="0"/> </xs:sequence> </extension> </complexContent> </xs:complexType> <!-- **************************************************** --> <xs:complexType name="connectorType"> <xs:annotation> <xs:documentation> The connectorType defines a resource adapter. </xs:documentation> </xs:annotation> <xs:sequence> <xs:element ref="sys:environment" minOccurs="0"/> <xs:element name="resourceadapter" type="ger:resourceadapterType" maxOccurs="unbounded"/> <xs:element name="adminobject" type="ger:adminobjectType" minOccurs="0" maxOccurs="unbounded"/> <xs:element ref="sys:gbean" minOccurs="0" maxOccurs="unbounded"/> </xs:sequence> </xs:complexType> <!-- **************************************************** --> <xs:complexType name="emptyType"/> <!-- **************************************************** --> <xs:complexType name="outbound-resourceadapterType"> <xs:annotation> <xs:documentation> The outbound-resourceadapterType specifies information about an outbound resource adapter. The information includes fully qualified names of classes/interfaces required as part of the connector architecture specified contracts for connection management, level of transaction support provided, one or more authentication mechanisms supported and additional required security permissions. If there is no authentication-mechanism specified as part of resource adapter element then the resource adapter does not support any standard security authentication mechanisms as part of security contract. The application server ignores the security part of the system contracts in this case. </xs:documentation> </xs:annotation> <xs:sequence> <xs:element name="connection-definition" type="ger:connection-definitionType" maxOccurs="unbounded"/> </xs:sequence> </xs:complexType> <!-- **************************************************** --> <xs:complexType name="resourceadapterType"> <xs:sequence> <xs:element name="resourceadapter-instance" type="ger:resourceadapter-instanceType" minOccurs="0"> </xs:element> <xs:element name="outbound-resourceadapter" type="ger:outbound-resourceadapterType" minOccurs="0"> </xs:element> </xs:sequence> </xs:complexType> <xs:complexType name="resourceadapter-instanceType"> <xs:annotation> <xs:documentation> The resourceadapter instance info is put in a separate optional element to provide easier more consistent support for 1.0 adapters. </xs:documentation> </xs:annotation> <xs:sequence> <xs:element name="resourceadapter-name" type="xs:string"/> <xs:element name="config-property-setting" type="ger:config-property-settingType" minOccurs="0" maxOccurs="unbounded"/> <xs:element ref="naming:workmanager"/> </xs:sequence> </xs:complexType> <!-- types borrowed from the j2ee schema. We might want to centralize these --> <xs:simpleType name="fully-qualified-classType"> <xs:restriction base="xs:string"/> </xs:simpleType> <xs:complexType name="descriptionType"> <xs:simpleContent> <xs:extension base="xs:string"> <xs:attribute ref="xml:lang"/> </xs:extension> </xs:simpleContent> </xs:complexType> </xs:schema>

Schema Document Properties

Target Namespace

http://geronimo.apache.org/xml/ns/j2ee/connector-1.1 Geronimo
Connector deployment descriptors must indicate the connector resource
adapter schema by using the above Geronimo specific J2EE namespace.

Element and Attribute Namespaces

  • Global element and attribute declarations belong to this schema's target namespace.
  • By default, local element declarations belong to this schema's target namespace.
  • By default, local attribute declarations have no namespace.

Schema Composition

This schema imports schema(s) from the following namespace(s):
http://www.w3.org/XML/1998/namespace (at http://www.w3.org/2001/xml.xsd)
http://geronimo.apache.org/xml/ns/naming-1.1 (at geronimo-naming-1.1.xsd)
http://geronimo.apache.org/xml/ns/deployment-1.1 (at geronimo-module-1.1.xsd)

Documentation

documents using this schema should start as :
<connectorxmlns="http://geronimo.apache.org/xml/ns/j2ee/connector-1.1"
version="1.5"> @(#)geronimo-connector_1_5.xsds

Declared Namespaces

xmlsolidSchema Component Representation <xs:schema targetNamespace="http://geronimo.apache.org/xml/ns/j2ee/connector-1.1" elementFormDefault="qualified" attributeFormDefault="unqualified"> <xs:import namespace="http://geronimo.apache.org/xml/ns/naming-1.1" schemaLocation="geronimo-naming-1.1.xsd"/> <xs:import namespace="http://geronimo.apache.org/xml/ns/deployment-1.1" schemaLocation="geronimo-module-1.1.xsd"/> <xs:import namespace="http://www.w3.org/XML/1998/namespace" schemaLocation="http://www.w3.org/2001/xml.xsd"/> </xs:schema>

Global Declarations

Element : connectorconnector

The connector element is the root element of the deployment descriptor for the resource adapter. This element includes general information - vendor name, resource adapter version,icon - about the resource adapter module. It also includes information specific to the implementation of the resource adapter library as specified through the element resource adapter.

Element:

connector

Name

connector

Type

ger:connectorType

Nillable

No

Abstract

No

Documentation

The connector element is the root element of the deployment
descriptor for the resource adapter. This element includes general information

  • XML Instance Representation
  • Schema Component Representation
    Both of which are depicted below.
xmlsolidXML Instance Representation: element - connector <ger:connector moduleId=" xs:string [1]" groupId=" xs:string [0..1]" suppressDefaultParentId=" xs:boolean [0..1]"> <!-- Uniqueness Constraint - resourceadapter-instance-name-uniqueness Selector - ger:resourceadapter/ger:resourceadapter-instance Field(s) - ger:resourceadapter-name --> <!-- Uniqueness Constraint - connectiondefinition-instance-name-uniqueness Selector - ger:resourceadapter/ger:outbound-resourceadapter/ger:connection-definition/ ger:connectiondefinition-instance Field(s) - ger:message-destination-name --> <sys:import> ... </sys:import> [0..*] <sys:dependency> ... </sys:dependency> [0..*] <ger:resourceadapter> ger:resourceadapterType </ger:resourceadapter> [1..*] <ger:adminobject> ger:adminobjectType </ger:adminobject> [0..*] <sys:gbean> ... </sys:gbean> [0..*] </ger:connector> xmlsolidSchema Component Representation: element - connector <element name="connector" type="ger:connectorType"> <xs:annotation> <xs:documentation> The connector element is the root element of the deployment descriptor for the resource adapter. This element includes </xs:documentation> </xs:annotation> <xs:unique name="resourceadapter-instance-name-uniqueness"> <xs:annotation> <xs:documentation> The resourceadapter-instance element must have a unique name. </xs:documentation> </xs:annotation> <xs:selector xpath="ger:resourceadapter/ger:resourceadapter-instance"/> <xs:field xpath="ger:resourceadapter-name"/> </xs:unique> <xs:unique name="connectiondefinition-instance-name-uniqueness"> <xs:annotation> <xs:documentation> The connectiondefinition-instance element must have a unique name. </xs:documentation> </xs:annotation> <xs:selector xpath="ger:resourceadapter/ger:outbound-resourceadapter/ger:connection-definition/ ger:connectiondefinition-instance"/> <xs:field xpath="ger:name"/> </xs:unique> <xs:unique name="admin-object-instance-name-uniqueness"> <xs:annotation> <xs:documentation> The admin-object-instance element must have a unique name. </xs:documentation> </xs:annotation> <xs:selector xpath="ger:adminobject/ger:adminobject-instance"/> <xs:field xpath="ger:message-destination-name"/> </xs:unique> </element>

Global Definitions

Complex Type : adminobject-instanceTypeinstanceType

Complex Type:

adminobject-instanceType

Super-types:

None

Sub-types:

None

Name

adminobject-instanceType

Abstract

no

xmlsolidXML Instance Representation: adminobject-instanceType <...> <ger:message-destination-name> xs:string </ger:message-destination-name> [1] ? <ger:config-property-setting> ger:config-property-settingType </ger:config-property-setting> [0..*] </...> xmlsolidSchema Component Representation: adminobject-instanceType <complexType name="adminobject-instanceType"> <sequence> <element name="message-destination-name" type="xs:string"> <annotation> <!-- <documentation>unique name for admin object instance.Used in object name of gbean for it. Matches message-destination-name in ejb-jar.xml assembly descriptor. </documentation>--> </annotation> </element>

Complex Type: adminobjectTypeadminobjectType

The adminobjectType specifies information about an administered object.Administered objects are specific to a messaging style or message provider in Geronimo connector xml schema.

Complex Type:

adminobjectType

Super-types:

None

Sub-types:

None

Name

adminobjectType

Abstract

no

Documentation

reference back into standard dd

xmlsolidXML Instance Representation : adminobjectType <...> <ger:adminobject-interface> ger:fully-qualified-classType </ger:adminobject-interface> [1] ? <ger:adminobject-class> ger:fully-qualified-classType </ger:adminobject-class> [1] ? <ger:adminobject-instance> ger:adminobject-instanceType </ger:adminobject-instance> [0..*] </...> xmlsolidScheme Component Representation: adminobjectType <complexType name="adminobjectType"> <sequence> <element name="adminobject-interface" type=" ger:fully-qualified-classType "/> <element name="adminobject-class" type=" ger:fully-qualified-classType "/> <element name="adminobject-instance" type=" ger:adminobject-instanceType " minOccurs="0" maxOccurs="unbounded"/> </sequence> </complexType>

Complex Type: config-property-settingTypesettingType

The config-propertyType contains a declaration of a single configuration property that may be used for providing configuration information.The declaration consists of an optional description, name,type and an optional value of the configuration property. If the resource adapter provider does not specify a value than the deployer is responsible for providing a valid value for a configuration property.
Any bounds or well-defined values of properties should be described in the description element

Complex Type:

config-property-settingType

Super-types:

xs:string < config-property-settingType (by extension)

Sub-types:

None

Name

config-property-settingType

Abstract

no

Documentation

The config-property-settingType contains a name-value pair for a config-property or
required-config-property

xmlsolidXML Instance Representation: config-property-settingType <... name=" xs:string [0..1]"> xs:string </...> xmlsolidSchema Component Representation: config-property-settingType <complexType name="config-property-settingType"> <simpleContent> <extension base=" xs:string "> <attribute name="name" type=" xs:string "/> </extension> </simpleContent> </complexType>

Complex Type: connection-definitionTypedefinitionType

Complex Type:

connection-definitionType

Super-types:

None

Sub-types:

None

Name

connection-definitionType

Abstract

no

Documentation

The connection-definitionType defines a set of connection interfaces and classes
pertaining to a particular connection type. This also includes configurable properties
for ManagedConnectionFactory instances that may be produced out of this set. The name
element uniquely identifies this instance

xmlsolidXML Instance Representation: connection-definitionType <...> <ger:connectionfactory-interface> ger:fully-qualified-classType </ger:connectionfactory-interface> [1] ? <ger:connectiondefinition-instance> ger:connectiondefinition-instanceType </ger:connectiondefinition-instance> [0..*] </...> xmlsolidSchema Component Representation: connection-definitionType <complexType name="connection-definitionType"> <sequence> <element name="connectionfactory-interface" type=" ger:fully-qualified-classType "/> <element name="connectiondefinition-instance" type=" ger:connectiondefinition-instanceType " minOccurs="0" maxOccurs="unbounded"/> </sequence> </complexType>

Complex Type: connectiondefinition-instanceTypedefinitioninstanceType

Complex Type:

connectiondefinition-instanceType

Super-types:

None

Sub-types:

None

Name

connectiondefinition-instanceType

Abstract

No

xmlsolidXML Instance Representation: connectiondefinition-instanceType <...> <ger:name> xs:string </ger:name> [1] <ger:implemented-interface> ger:fully-qualified-classType </ger:implemented-interface> [0..*] ? <ger:config-property-setting> ger:config-property-settingType </ger:config-property-setting> [0..*] <ger:connectionmanager> ger:connectionmanagerType </ger:connectionmanager> [1] </...> xmlsolidSchema Component Representation: connectiondefinition-instanceType <complexType name="connectiondefinition-instanceType"> <sequence> <element name="name" type=" xs:string "/> <element name="implemented-interface" type=" ger:fully-qualified-classType " minOccurs="0" maxOccurs="unbounded"/> <element name="config-property-setting" type=" ger:config-property-settingType " minOccurs="0" maxOccurs="unbounded"/> <-- <xs:choice>--> <element name="connectionmanager" type=" ger:connectionmanagerType "/> <-- <xs:element name="connectionmanager-ref" type="xs:string"/>--> <-- </xs:choice>--> </sequence> </complexType>

Complex Type: connectionmangerTypeconnectionmanagerType

Complex Type:

connectionmanagerType

Super-types:

None

Sub-types:

None

Name

connectionmanagerType

Abstract

no

Documentation

The ConnectionManager configuration

xmlsolidXML Instance Representation: connectionmanagerType <...> <ger:container-managed-security> ger:emptyType </ger:container-managed-security> [0..1] Start Choice [0..1] <ger:no-transaction> ger:emptyType </ger:no-transaction> [1] <ger:local-transaction> ger:emptyType </ger:local-transaction> [1] <ger:xa-transaction> ger:xatransactionType </ger:xa-transaction> [1] <ger:transaction-log> ger:emptyType </ger:transaction-log> [1] End Choice Start Choice [1] <ger:no-pool> ger:emptyType </ger:no-pool> [1] <ger:single-pool> ger:singlepoolType </ger:single-pool> [1] <ger:partitioned-pool> ger:partitionedpoolType </ger:partitioned-pool> [1] End Choice </...> xmlsolidSchema Component Representation: connectionmanagerType <complexType name="connectionmanagerType"> <sequence> <element name="container-managed-security" type=" ger:emptyType " minOccurs="0"/> <choice minOccurs="0"> <element name="no-transaction" type=" ger:emptyType "/> <element name="local-transaction" type=" ger:emptyType "/> <element name="xa-transaction" type=" ger:xatransactionType "/> <element name="transaction-log" type=" ger:emptyType "/> </choice> <choice> <element name="no-pool" type=" ger:emptyType "/> <element name="single-pool" type=" ger:singlepoolType "/> <element name="partitioned-pool" type=" ger:partitionedpoolType "/> </choice> </sequence> </complexType>

Complex Type: connectorTypeconnectorType

The connectorType defines a resource adapter

Complex Type:

connectorType

Super-types:

None

Sub-types:

None

Name

connectorType

Abstract

no

Documentation

The connectorType defines a resource adapter

xmlsolidXML Instance Representation: connectorType <... <sys:environment>..</sys:enviorment> <sys:import> ... </sys:import> [0..*] <sys:dependency> ... </sys:dependency> [0..*] <ger:resourceadapter> ger:resourceadapterType </ger:resourceadapter> [1..*] <ger:adminobject> ger:adminobjectType </ger:adminobject> [0..*] <sys:gbean> ... </sys:gbean> [0..*] </...> xmlsolidSchema Component Representation: connectorType <complexType name="connectorType"> <sequence> <element ref="sys:environment" minOccurs="0"/> <element name="resourceadapter" type="ger:resourceadapterType" maxOccurs="unbounded"/> <element name="adminobject" type="ger:adminobjectType" minOccurs="0" maxOccurs="unbounded"/> <element ref="sys:gbean" minOccurs="0" maxOccurs="unbounded"/> </sequence> </complexType>

Complex Type: descriptionTypedescriptionType

Complex Type:

descriptionType

Super-types:

xs:string < descriptionType (by extension)

Sub-types:

None

Name

descriptionType

Abstract

no

xmlsolidXML Instance Representation: descriptionType <... xml:lang="[0..1]"> xs:string </...> xmlsolidSchema Component Representation: descriptionType <complexType name="descriptionType"> <simpleContent> <extension base=" xs:string "> <attribute ref=" xml:lang"/> </extension> </simpleContent> </complexType>

Complex Type: emptyTypeemptyType

Complex Type:

emptyType

Super-types:

None

Sub-types:

None

Name

emptyType

Abstract

no

xmlsolidXML Instance Representation: emptyType <.../> xmlsolidSchema Component Representation: emptyType <complexType name="emptyType"/>

Complex Type: outbound-resourceadapterTyperesourceadapterType

Complex Type:

outbound-resourceadapterType

Super-types:

None

Sub-types:

None

Name

outbound-resourceadapterType

Abstract

no

Documentation

The outbound-resourceadapterType specifies information about an outbound resource
adapter. The information includes fully qualified names of classes/interfaces required
as part of the connector architecture specified contracts for connection management,
level of transaction support provided, one or more authentication mechanisms supported
and additional security permissions required. If there is no authentication-mechanism
specified as part of resource adapter element then the resource adapter does not support
any standard security authentication mechanisms as part of security contract. In this
case,the application server ignores the security part of the system contracts.

xmlsolidXML Instance Representation: outbound-resourceadapterType <...> <ger:connection-definition> ger:connection-definitionType </ger:connection-definition> [1..*] </...> xmlsolidSchema Component Representation: outbound-resourceadapterType <complexType name="outbound-resourceadapterType"> <sequence> <element name="connection-definition" type=" ger:connection-definitionType " maxOccurs="unbounded"/> </sequence> </complexType>

Complex Type: partitionedpoolTypepartitionedpoolType

Complex Type:

partitionedpoolType

Super-types:

singlepoolType < partitionedpoolType (by extension)

Sub-types:

None

Name

partitionedpoolType

Abstract

No

xmlsolidXML Instance Representation: partitionedpoolType <...> <ger:max-size> xs:int </ger:max-size> [0..1] <ger:min-size> xs:int </ger:min-size> [0..1] <ger:blocking-timeout-milliseconds> xs:int </ger:blocking-timeout-milliseconds> [0..1] <ger:idle-timeout-minutes> xs:int </ger:idle-timeout-minutes> [0..1] Start Choice [1] <ger:match-one> ger:emptyType </ger:match-one> [1] <ger:match-all> ger:emptyType </ger:match-all> [1] <ger:select-one-assume-match> ger:emptyType </ger:select-one-assume-match> [1] End Choice <ger:partition-by-subject> ger:emptyType </ger:partition-by-subject> [0..1] <ger:partition-by-connectionrequestinfo> ger:emptyType </ger:partition-by-connectionrequestinfo> [0..1] </...> xmlsolidSchema Component Representation: partitionedpoolType <xs:complexType name="partitionedpoolType"> <complexContent> <extension base="ger:singlepoolType"> <xs:sequence> <xs:element name="partition-by-subject" type="ger:emptyType" minOccurs="0"/> <xs:element name="partition-by-connectionrequestinfo" type="ger:emptyType" minOccurs="0"/> </xs:sequence> </extension> </complexContent>

Complex Type: resourceadapter-instanceTypeadapterinstanceType

Complex Type:

resourceadapter-instanceType

Super-types:

None

Sub-types:

None

Name

resourceadapter-instanceType

Abstract

no

Documentation

The resourceadapter instance info is put in a separate optional element
to provide easier more consistent support for 1.0 adapters.

xmlsolidXML Instance Representation: resourceadapter-instanceType <...> <ger:resourceadapter-name> xs:string </ger:resourceadapter-name> [1] <ger:config-property-setting> ger:config-property-settingType </ger:config-property-setting> [0..*] <naming:workmanager> ... </naming:workmanager> [1] </...> xmlsolidSchema Component Representation: resourceadapter-instanceType <complexType name="resourceadapter-instanceType"> <sequence> <element name="resourceadapter-name" type=" xs:string "/> <element name="config-property-setting" type=" ger:config-property-settingType " minOccurs="0" maxOccurs="unbounded"/> <element ref=" naming:workmanager "/> </sequence> </complexType>

Complex Type: resourceadapterTyperesourceadapterType1

Complex Type:

resourceadapterType

Super-types:

None

Sub-types:

None

Name

resourceadapterType

Abstract

no

xmlsolidXML Instance Representation: resourceadapterType <...> <ger:resourceadapter-instance> ger:resourceadapter-instanceType </ger:resourceadapter-instance> [0..1] <ger:outbound-resourceadapter> ger:outbound-resourceadapterType </ger:outbound-resourceadapter> [0..1] </...> xmlsolidSchema Component Representation: resourceadapterType <complexType name="resourceadapterType"> <sequence> <element name="resourceadapter-instance" type=" ger:resourceadapter-instanceType " minOccurs="0"/> <element name="outbound-resourceadapter" type=" ger:outbound-resourceadapterType " minOccurs="0"/> </sequence> </complexType>

Complex Type: singlepoolTypesinglepoolType

Complex Type:

singlepoolType

Super-types:

None

Sub-types:

*partitionedpoolType (by extension)

Name

singlepoolType

Abstract

no

xmlsolidXML Instance Representation: singlepoolType <...> <ger:max-size> xs:int </ger:max-size> [0..1] <ger:min-size> xs:int </ger:min-size> [0..1] <ger:blocking-timeout-milliseconds> xs:int </ger:blocking-timeout-milliseconds> [0..1] <ger:idle-timeout-minutes> xs:int </ger:idle-timeout-minutes> [0..1] Start Choice [1] <ger:match-one> ger:emptyType </ger:match-one> [1] <ger:match-all> ger:emptyType </ger:match-all> [1] <ger:select-one-assume-match> ger:emptyType </ger:select-one-assume-match> [1] End Choice </...> xmlsolidSchema Component Representation: singlepoolType <complexType name="singlepoolType"> <sequence> <element name="max-size" type=" xs:int " minOccurs="0"/> <element name="min-size" type=" xs:int " minOccurs="0"/> <element name="blocking-timeout-milliseconds" type=" xs:int " minOccurs="0"/> <element name="idle-timeout-minutes" type=" xs:int " minOccurs="0"/> <choice> <element name="match-one" type=" ger:emptyType "/> <element name="match-all" type=" ger:emptyType "/> <element name="select-one-assume-match" type=" ger:emptyType "/> </choice> </sequence> </complexType>

Complex Type: xatransationTypexatransactionType

Complex Type:

xatransactionType

Super-types:

None

Sub-types:

None

Name

xatransactionType

Abstract

no

xmlsolidXML Instance Representation: xatransactionType <...> <ger:transaction-caching> ger:emptyType </ger:transaction-caching> [0..1] <ger:thread-caching> ger:emptyType </ger:thread-caching> [0..1] </...> xmlsolidSchema Component Representation: xatransationType <complexType name="xatransactionType"> <element name="transaction-caching" type="ger:emptyType" minOccurs="0"/> <element name="thread-caching" type="ger:emptyType" minOccurs="0"/> </complexType>

Simple Type: fully-qualifies-classTypeclassType

Simple Type:

fully-qualified-classType

Super-types:

xs:string < fully-qualified-classType (by restriction)

Sub-types:

None

Name

fully-qualified-classType

Content

  • Base XSD Type: string
xmlsolidSchema Component Representation: fully-qualifies-classType <simpleType name="fully-qualified-classType"> <restriction base="xs:string"/> </simpleType>

Legend

Complex Type:

AusAddress

Schema Component Type

Schema Component Name

Super-types:

Address < AusAddress (by extension)

Sub-types:

  • QLDAddress (by restriction)

If this schema component is a type definition, its type hierarchy is shown in a gray-bordered box.

Name

AusAddress

Abstract

no

The table above displays the properties of this schema component.

xmlsolidXML Instance Representation <... country="Australia" > <unitNo> string </unitNo> [0..1] <houseNo> string </houseNo> [1] <street> string </street> [1] Start Choice [1] <city> string </city> [1] <town> string </town> [1] End Choice <state> AusStates </state> [1] <postcode> string <<pattern = [1-9][0-9]{3}>> </postcode> [1] ? </...>

The XML Instance Representation table above shows the schema component's content as an XML instance.

  • The minimum and maximum occurrence of elements and attributes are provided in square brackets, e.g. 0..1.
  • Model group information are shown in gray, e.g. Start Choice ... End Choice.
  • For type derivations, the elements and attributes that have been added to or changed from the base type's content are shown in bold.
  • If an element/attribute has a fixed value, the fixed value is shown in green, e.g. country="Australia".
  • Otherwise, the type of the element/attribute is displayed.
    • If the element/attribute's type is in the schema, a link is provided to it.
    • For local simple type definitions, the constraints are displayed in angle brackets, e.g.
      <pattern = [1-9][0-9]{3}/>.
  • If a local element/attribute has documentation, it will be displayed in a window that pops up when the question mark inside the attribute or next to the element is clicked, e.g. <postcode>.
xmlsolidSchema Component Representation <complexType name="AusAddress"> <complexContent> <extension base=" Address "> <sequence> <element name="state" type=" AusStates "/> <element name="postcode"> <simpleType> <restriction base=" string "> <pattern value="[1-9][0-9]{3}"/> </restriction> </simpleType> </element> </sequence> <attribute name="country" type=" string " fixed="Australia"/> </extension> </complexContent> </complexType>

The Schema Component Representation table above displays the underlying XML representation of the schema component. (Annotations are not shown.)

Glossary

Abstract (Applies to complex type definitions and element declarations). An abstract element or complex type cannot used to validate an element instance. If there is a reference to an abstract element, only element declarations that can substitute the abstract element can be used to validate the instance. For references to abstract type definitions, only derived types can be used.

All Model Group Child elements can be provided in any order in instances. See: http://www.w3.org/TR/xmlschema-1/#element-all.

Choice Model Group Only one from the list of child elements and model groups can be provided in instances. See: http://www.w3.org/TR/xmlschema-1/#element-choice.

Collapse Whitespace Policy Replace tab, line feed, and carriage return characters with space character (Unicode character 32). Then, collapse contiguous sequences of space characters into single space character, and remove leading and trailing space characters.

Disallowed Substitutions (Applies to element declarations). If substitution is specified, then substitution group members cannot be used in place of the given element declaration to validate element instances. If derivation methods, e.g. extension, restriction, are specified, then the given element declaration will not validate element instances that have types derived from the element declaration's type using the specified derivation methods. Normally, element instances can override their declaration's type by specifying an xsi:type attribute.

Key Constraint Like Uniqueness Constraint, but additionally requires that the specified value(s) must be provided. See: http://www.w3.org/TR/xmlschema-1/#cIdentity-constraint_Definitions.

Key Reference Constraint Ensures that the specified value(s) must match value(s) from a Key Constraint or Uniqueness Constraint. See: http://www.w3.org/TR/xmlschema-1/#cIdentity-constraint_Definitions.

Model Group Groups together element content, specifying the order in which the element content can occur and the number of times the group of element content may be repeated. See: http://www.w3.org/TR/xmlschema-1/#Model_Groups.

Nillable (Applies to element declarations). If an element declaration is nillable, instances can use the xsi:nil attribute. The xsi:nil attribute is the boolean attribute, nil, from the http://www.w3.org/2001/XMLSchema-instance namespace. If an element instance has an xsi:nil attribute set to true, it can be left empty, even though its element declaration may have required content.

Notation A notation is used to identify the format of a piece of data. Values of elements and attributes that are of type, NOTATION, must come from the names of declared notations. See: http://www.w3.org/TR/xmlschema-1/#cNotation_Declarations.

Preserve Whitespace Policy Preserve whitespaces exactly as they appear in instances.

Prohibited Derivations (Applies to type definitions). Derivation methods that cannot be used to create sub-types from a given type definition.

Prohibited Substitution (Applies to complex type definitions). Prevents sub-types that have been derived using the specified derivation methods from validating element instances in place of the given type definition.

Replace Whitespace Policy Replace tab, line feed, and carriage return characters with space character (Unicode character 32).

Sequence Model Group Child elements and model groups must be provided in the specified order in instances. See: http://www.w3.org/TR/xmlschema-1/#element-sequence.

Substitution Group Elements that are members of a substitution group can be used wherever the head element of the substitution group is referenced.

Substitution Group Exclusions (Applies to element declarations). Prohibits element declarations from nominating themselves as being able to substitute a given element declaration, if they have types that are derived from the original element's type using the specified derivation methods.

Target Namespace The target namespace identifies the namespace that components in this schema belongs to. If no target namespace is provided, then the schema components do not belong to any namespace.

Uniqueness Constraint Ensures uniqueness of an element/attribute value, or a combination of values, within a specified scope. See: http://www.w3.org/TR/xmlschema-1/#cIdentity-constraint_Definitions.

  • No labels