Child pages
  • Running multiple Geronimo instances
Skip to end of metadata
Go to start of metadata

Regarding both Geronimo javaee6 and minimal release bundles. Full support for multiple instances was completed in GERONIMO-6270 and its sub-tasks. This support is available in the latest snapshots after March 1, 2012, and will be in the 3.0-beta-2 standard release. This documents how to run multiple instances after applying the changes from GERONIMO-6270.

For prior releases, multiple installations can safely run side-by-side by completely copying the server folder to another, and start the 2nd server installation after changing its portOffset value.


Simply put, GERONIMO_HOME is the path to the server binary installation and GERONIMO_SERVER is the path to the server run-time configuration. GERONIMO_HOME is the path to where Geronimo was installed which every instance references, and every Geronimo instance defines its own GERONIMO_SERVER as the path to the configuration for the instance.

We define GERONIMO_SERVER in order to have the Geronimo start procedures startup an instance.

Path Resolution

GERONIMO_HOME is obtained during startup relative to the directory Geronimo is installed in. By default, if the user does not define GERONIMO_SERVER it is set to GERONIMO_HOME. If the user defines GERONIMO_SERVER it is attempted to be resolved to an absolute path in the following ways:

  1. First, as an absolute path IFF GERONIMO_SERVER is absolute
  2. Second, as a relative path to GERONIMO_HOME IFF GERONIMO_SERVER is not absolute

Technical Terms

Skip this sub-section if you do not care about the technical internals of Geronimo's use of GERONIMO_HOME versus GERONIMO_SERVER

Inside Geronimo there is a concept of home, base, and server, with corresponding java properties org.apache.geronimo.home.dir and org.apache.geronimo.server.dir. base and server are the same, but Geronimo references base in general to reference the location for run-time configuration. The definition of server is user provided, and redefines base.

When Geronimo runs, home and base properties are defined relative to the installation directory of Geronimo. When a user starts up a Geronimo instance, the user defines the server property. Defining the server property triggers Geronimo to change its base from home to server thus starting up a Geronimo instance.

Several internal libraries used by Geronimo define two categories of properties as home and base, and Geronimo defines these further when server is defined. Outside of running multiple Geronimo instances base properties can be used to separate the binary installation from the user-modifiable configuration for a single server installation when that is desirable in some disk layout strategies.

The layout of a Geronimo instance

It is possible to run multiple instances of Geronimo on the same machine.

Currently multiple instances of Geronimo share the following directories in <geronimo_home>, the directory where you installed Geronimo. These are read-only.

    • bin
    • jsr88
    • lib
    • schema

The repository is shared, and contains lots of basic and important libraries are required to bootstrap server. It is recommended to configure second repositories, one for each instance. See Configuring multiple Repositories.

    • repository (This is the primary shared repository for bootstrapping Geronimo instances)

When running multiple instances, do not run a server from GERONIMO_HOME but only from GERONIMO_SERVER roots. Also set the GERONIMO_HOME/repository to be read-only to help prevent accidentally deploying to it when instead the intention is to deploy to the local repository for each Geronimo instance at GERONIMO_SERVER/repository.

Each instance gets its own copy of the following at <geronimo_home>/<instance_name> . etc is read-only and var is read-write. Both are necessary for each Geronimo instance.

    • etc
    • var

These are also read-write but are not part of the minimally necessary directories and files for running a Geronimo instance, but may be desired. The deploy and repository directories will be automatically created when you start Geronimo if they do not already exist.

    • repository (This is the local repository under <geronimo_home>/<instance_name>, and is not the same as the primary shared repository)
    • deploy
    • hotbundles

The bin, lib and schema directories are read-only, and thus are shared between instances. The repository is also shared, which means that an application deployed in one instance will show up in the list of deployed modules for all instances. Thus creating the second repository for each instance is recommended to keep deployments local to the Geronimo instances. See Configuring multiple Repositories.

Here is an example layout of what it would look like to have installed one Geronimo instance named "foo-server".

solid /opt/geronimo3 - GERONIMO_HOME |-- bin - read-only |-- foo-server - GERONIMO_SERVER | |-- etc - read-only for the instance | |-- repository - read-write (The instance's local repository you do want to deploy to) | `-- var - read-write |-- jsr88 - read-only |-- lib - read-only |-- repository - read-write (The primary shared repository you don't want to deploy to) `-- schema - read-only

Creating a new server instance

Start with a fresh image of Geronimo. Do not use an image that has been used to run the default instance.

To create an instance named foo-server do the following. All your instance data will be put in <geronimo_home>/foo-server. All the directories named below are relative to <geronimo_home>.
Follow the procedures as below:

  1. Create a directory foo-server under <geronimo_home>.
  2. Copy var and etc directories to foo-server. You can use the command deploy:new-server-instance to help you with this step. < GERONIMO-6287
  3. Recommended: create foo-server/repository and set it up as a second repository for the Geronimo instance. See Configuring multiple Repositories
  4. Edit foo-server/var/config/ and change the portOffset. Try using any integers such as 1, 2, 10, 20, 30.. for various instances.

Running an instance

  1. Set the GERONIMO_SERVER environment variable to define the server instance directory before you start the server. This variable will be set to GERONIMO_HOME as default if not defined. Set GERONIMO_SERVER=foo-server to change the server name to an instance named foo-server located at <GERONIMO_HOME>/foo-server, or GERONIMO_SERVER=/opt/geronimo/foo-server to set the absolute path.
  • On a Windows system: set GERONIMO_SERVER=foo-server
  • On a Unix-like system: export GERONIMO_SERVER="foo-server"
  1. Start the server using startup solid <geronimo_home>/bin/startup
  2. To shutdown this instance, use the port number of RMI Naming port (default 1099). For the new instance foo-server, the port number should be 1099 plus portOffset specified in foo-server/var/config/ solid <geronimo_home>/bin/shutdown --port <RMI_port_num>
  3. To deploy applications to this instance use the port number of RMI Naming port
  • This deploys to the primary Geronimo repository solid <geronimo_home>/bin/deploy --port <RMI_port_num> deploy <applications>
  • This deploys to a secondary Geronimo repository exclusive to the Geronimo server defined as GERONIMO_SERVER=foo-server. See Configuring multiple Repositories for more detailed instructions. solid <geronimo_home>/bin/deploy --port <RMI_port_num> deploy --targets <foo_repo_name> <applications>

The Administrative Console can also be used for all these operations. Connect to an instance by using the right HTTP port (default 8080).

Example runtime for multiple instances

  • First download the Geronimo bundle distribution
  • Determine what you want GERONIMO_HOME to be. We will use /opt/geronimo3 for this example.
  • Unpack the Geronimo bundle, and move the unpacked directory to /opt/geronimo3
  • We'll create two Geronimo instances named gserv1 and gserv2
    • Create the Geronimo instance directories as /opt/geronimo3/gserv1 and /opt/geronimo3/gserv2
    • Copy the directories var and etc to each instance directory
    • Create a repository directory within each instance directory and set it up as a second repository for the corresponding Geronimo instance. See Configuring multiple Repositories
    • Modify the gserv(1|2)/var/config/ file for each Geronimo instance changing the PortOffset. We'll set the PortOffset for gserv1 to 100 and the PortOffset for gserv2 to 200 for our example.
    • Create a start script in each Geronimo instance directory to make it easier to start each instance
      • /opt/geronimo3/gserv1/ solid #!/bin/bash # Geronimo start script # instance: gserv1 # Uncomment this to explicitly set Geronimo's runtime Java #JAVA_HOME=/usr/jdk1.6.0_25 #PATH=${JAVA_HOME}/bin:${PATH} export GERONIMO_HOME=/opt/geronimo3 export GERONIMO_SERVER=gserv1 cd ${GERONIMO_SERVER} # Normal startup ${GERONIMO_HOME}/bin/startup # Interactive startup #${GERONIMO_HOME}/bin/geronimo run
      • /opt/geronimo3/gserv2/ solid #!/bin/bash # Geronimo start script # instance: gserv2 # Uncomment this to explicitly set Geronimo's runtime Java #JAVA_HOME=/usr/jdk1.6.0_25 #PATH=${JAVA_HOME}/bin:${PATH} export GERONIMO_HOME=/opt/geronimo3 export GERONIMO_SERVER=gserv2 cd ${GERONIMO_SERVER} # Normal startuo ${GERONIMO_HOME}/bin/startup # Interactive startup #${GERONIMO_HOME}/bin/geronimo run
    • On linux, make the start script is executable with chmod: chmod 755
  • Your Geronimo installation file structure should look something similar to this: solid /opt/geronimo3 |-- LICENSE |-- NOTICE |-- README.txt |-- RELEASE_NOTES-3.0-SNAPSHOT.txt |-- bin |-- -etc- |-- gserv1 | |-- etc | |-- repository | |-- | `-- var |-- gserv2 | |-- etc | |-- repository | |-- | `-- var |-- jsr88 |-- lib |-- +repository+ |-- schema `-- -var- It is suggested that in GERONIMO_HOME/etc and GERONIMO_HOME/var are removed and GERONIMO_HOME/repository is made read-only
  • Finally you can start up each instance by executing their associated start script you just created in the previous step

Further readings

To use multiple repositories see Configuring multiple Repositories.

  • No labels