Please see the Configuration section to learn how to supply a configuration to CXF. The following sections include just JAX-WS specific configuration items.

Configuring an Endpoint

A JAX-WS Endpoint can be configured in XML in addition to using the JAX-WS APIs. Once you've created your server implementation, you simply need to provide the class name and an address. Here is a simple example:

<beans xmlns="http://www.springframework.org/schema/beans"
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xmlns:jaxws="http://cxf.apache.org/jaxws"
	xsi:schemaLocation="
http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
http://cxf.apache.org/jaxws http://cxf.apache.org/schemas/jaxws.xsd">

<jaxws:endpoint id="classImpl"
    implementor="org.apache.cxf.jaxws.service.Hello"
    endpointName="e:HelloEndpointCustomized"
    serviceName="s:HelloServiceCustomized"
    address="http://localhost:8080/test"
    xmlns:e="http://service.jaxws.cxf.apache.org/endpoint"
    xmlns:s="http://service.jaxws.cxf.apache.org/service"/>

</beans>

Be sure to include the JAX-WS schemaLocation attribute specified on the root beans element. This allows CXF to validate the file and is required. Also note the namespace declarations at the end of the <jaxws:endpoint/> tag--these are required because the combined "{namespace}localName" syntax is presently not supported for this tag's attribute values.

The jaxws:endpoint element supports many additional attributes:

Name	Value
endpointName	The endpoint name this service is implementing, it maps to the wsdl:port@name. In the format of "ns:ENDPOINT_NAME" where ns is a namespace prefix valid at this scope.
publish	Whether the endpoint should be published now, or whether it will be published at a later point.
serviceName	The service name this service is implementing, it maps to the wsdl:service@name. In the format of "ns:SERVICE_NAME" where ns is a namespace prefix valid at this scope.
wsdlLocation	The location of the WSDL. Can be on the classpath, file system, or be hosted remotely.
bindingUri	The URI, or ID, of the message binding for the endpoint to use. For SOAP the binding URI(ID) is specified by the JAX-WS specification. For other message bindings the URI is the namespace of the WSDL extensions used to specify the binding.
address	The service publish address
bus	The bus name that will be used in the jaxws endpoint.
implementor	The implementor of jaxws endpoint. You can specify the implementor class name here, or just the ref bean name in the format of "#REF_BEAN_NAME"
implementorClass	The implementor class name, it is really useful when you specify the implementor with the ref bean which is wrapped by using Spring AOP

It also supports many child elements:

Name	Value
jaxws:executor	A Java executor which will be used for the service. This can be supplied using the Spring <bean class="MyExecutor"/> syntax.
jaxws:inInterceptors	The incoming interceptors for this endpoint. A list of <bean>s or <ref>s.
jaxws:inFaultInterceptors	The incoming fault interceptors for this endpoint. A list of <bean>s or <ref>s.
jaxws:outInterceptors	The outgoing interceptors for this endpoint. A list of <bean>s or <ref>s.
jaxws:outFaultInterceptors	The outgoing fault interceptors for this endpoint. A list of <bean>s or <ref>s.
jaxws:properties	A properties map which should be supplied to the JAX-WS endpoint. See below.
jaxws:dataBinding	You can specify the which DataBinding will be use in the endpoint , This can be supplied using the Spring <bean class="MyDataBinding"/> syntax.
jaxws:binding	You can specify the BindingFactory for this endpoint to use. This can be supplied using the Spring <bean class="MyBindingFactory"/> syntax.
jaxws:features	The features that hold the interceptors for this endpoint. A list of <bean>s or <ref>s
jaxws:invoker	The invoker which will be supplied to this endpoint. This can be supplied using the Spring <bean class="MyInvoker"/> syntax.
jaxws:schemaLocations	The schema locations for endpoint to use. A list of <schemaLocation>s
jaxws:serviceFactory	The service factory for this endpoint to use. This can be supplied using the Spring <bean class="MyServiceFactory"/> syntax

Here is a more advanced example which shows how to provide interceptors and properties:

<beans xmlns="http://www.springframework.org/schema/beans"
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xmlns:jaxws="http://cxf.apache.org/jaxws"
        xmlns:soap="http://cxf.apache.org/bindings/soap"
	xsi:schemaLocation="
http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
http://cxf.apache.org/bindings/soap http://cxf.apache.org/schemas/configuration/soap.xsd
http://cxf.apache.org/jaxws http://cxf.apache.org/schemas/jaxws.xsd">

  <import resource="classpath:META-INF/cxf/cxf.xml"/>
  <import resource="classpath:META-INF/cxf/cxf-extension-soap.xml"/>

  <jaxws:endpoint
    id="helloWorld"
    implementor="demo.spring.HelloWorldImpl"
    address="http://localhost/HelloWorld">
    <jaxws:inInterceptors>
      <bean class="com.acme.SomeInterceptor"/>
      <ref bean="anotherInterceptor"/>
    </jaxws:inInterceptor>
    <jaxws:properties>
      <entry key="mtom-enabled" value="true"/>
    </jaxws:properties>
  </jaxws:endpoint>

  <bean id="anotherInterceptor" class="com.acme.SomeInterceptor"/>

  <jaxws:endpoint id="simpleWithBinding"
    implementor="#greeter" address="http://localhost:8080/simpleWithAddress">
  	<jaxws:binding>
  	   <soap:soapBinding mtomEnabled="true" version="1.2"/>
  	</jaxws:binding>
  </jaxws:endpoint>

  <jaxws:endpoint id="inlineInvoker" address="http://localhost:8080/simpleWithAddress">
    <jaxws:implementor>
      <bean class="org.apache.hello_world_soap_http.GreeterImpl"/>
    </jaxws:implementor>
    <jaxws:invoker>
      <bean class="org.apache.cxf.jaxws.spring.NullInvoker"/>
    </jaxws:invoker>
  </jaxws:endpoint>

</beans>

If you are a Spring user, you'll notice that the jaxws:properties element follows the Spring Map syntax.

Configuring a Client Proxy

Building a Client using this configuration is only applicable for those wishing to inject a Client into their Spring ApplicationContext.

To build a Client using Spring, you'll need to declare a proxy factory bean and also a client bean which is created by that proxy factory. Here is an example:

<beans xmlns="http://www.springframework.org/schema/beans"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xmlns:jaxws="http://cxf.apache.org/jaxws"
  xsi:schemaLocation="
http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
http://cxf.apache.org/jaxws http://cxf.apache.org/schemas/jaxws.xsd">

  <bean id="proxyFactory" class="org.apache.cxf.jaxws.JaxWsProxyFactoryBean">
    <property name="serviceClass" value="demo.spring.HelloWorld"/>
    <property name="address" value="http://localhost:9002/HelloWorld"/>
  </bean>

  <bean id="client" class="demo.spring.HelloWorld"
    factory-bean="proxyFactory" factory-method="create"/>

</beans>

The JaxWsProxyFactoryBean in this case takes two properties. The service class, which is the interface of the Client proxy you wish to create. The address is the address of the service you wish to call.

The second bean definition is for the client. In this case it implements the HelloWorld interface and is created by the proxyFactory <bean> by calling the create() method. You can then reference this "client" bean and inject it anywhere into your application. Here is an example of a very simple Java class which accesses the client bean:

include org.springframework.context.support.ClassPathXmlApplicationContext;

public final class HelloWorldClient {

     private HelloWorldClient() { }

     public static void main(String args[]) throws Exception {
         ClassPathXmlApplicationContext context = new ClassPathXmlApplicationContext(
             new String[]{"my/path/to/client-beans.xml"});

         HelloWorld client = (HelloWorld)context.getBean("client");

         String response = client.sayHi("Dan");
         System.out.println("Response: " + response);
         System.exit(0);
     }
}

The ProxyFactoryBean supports many other properties:

Name	Value
clientFactoryBean	The ClientFactoryBean used in construction of this proxy.
password	The password which the transport should use.
username	The username which the transport should use.
wsdlURL	The wsdl the client should use to configure itself.

Configuring an Endpoint/Client Proxy Using CXF APIs

JAX-WS endpoints and client proxies are implemented on top of CXF's frontend-neutral endpoint API. You can therefore use CXF APIs to enhance the functionality of a JAX-WS endpoint or client proxy, for example by adding interceptors.

To cast a client proxy to a CXF client:

GreeterService gs = new GreeterService();
Greeter greeter = gs.getGreeterPort();

org.apache.cxf.endpoint.Client client =
org.apache.cxf.frontend.ClientProxy.getClient(greeter);
org.apache.cxf.endpoint.Endpoint cxfEndpoint = client.getEndpoint();
cxfEndpoint.getOutInterceptors().add(...);

To cast a JAX-WS endpoint to a CXF server:

javax.xml.ws.Endpoint jaxwsEndpoint = javax.xml.ws.Endpoint.publish("http://localhost:9020/SoapContext/GreeterPort", new GreeterImpl());
org.apache.cxf.jaxws.EndpointImpl jaxwsEndpointImpl = (org.apache.cxf.jaxws.EndpointImpl)jaxwsEndpoint;
org.apache.cxf.endpoint.Server server = jaxwsEndpointImpl.getServer();
org.apache.cxf.endpoint.Endpoint cxfEndpoint = server.getEndpoint();
cxfEndpoint.getOutInterceptors().add(...);
org.apache.cxf.service.Service cxfService = cxfEndpoint.getService();
cxfService.getOutInterceptors().add(...);

Configure the JAXWS Server/Client Using Spring

CXF provides <jaxws:server>, <jaxws:client> to configure the server/client side endpoint. Here are some exmples:

<beans xmlns="http://www.springframework.org/schema/beans"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      xmlns:jaxws="http://cxf.apache.org/jaxws"
      xmlns:soap="http://cxf.apache.org/bindings/soap"
      xsi:schemaLocation="
http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
http://cxf.apache.org/bindings/soap http://cxf.apache.org/schemas/configuration/soap.xsd
http://cxf.apache.org/jaxws http://cxf.apache.org/schemas/jaxws.xsd">
 <jaxws:server id="inlineImplementor" address="http://localhost:8080/simpleWithAddress">
    <jaxws:serviceBean>
      <bean class="org.apache.hello_world_soap_http.GreeterImpl"/>
    </jaxws:serviceBean>
  </jaxws:server>

  <jaxws:server id="bookServer"
  	serviceClass="org.apache.cxf.anonymous_complex_type.AnonymousComplexTypeImpl"
    address="http://localhost:8080/act" 
    bus="cxf">
    <jaxws:invoker>
      <bean class="org.apache.cxf.service.invoker.BeanInvoker">
        <constructor-arg>
          <bean class="org.apache.cxf.anonymous_complex_type.AnonymousComplexTypeImpl"/>
        </constructor-arg>
      </bean>
    </jaxws:invoker>
     <jaxws:dataBinding>
      <bean class="org.apache.cxf.jaxb.JAXBDataBinding">
        <property name="namespaceMap">
    		<map>
   			<entry>
      			<key><value>http://cxf.apache.org/anonymous_complex_type/</value></key>
      			<value>BeepBeep</value>
   			</entry>
      		</map>
        </property>
      </bean>
      </jaxws:dataBinding>
  </jaxws:server>

  <jaxws:client id="bookClient" 
    serviceClass="org.apache.cxf.anonymous_complex_type.AnonymousComplexType"
    address="http://localhost:8080/act"/>

</beans>

Since JAXWS frontend server and client spring configuration parser are inherited from simple front,
Please ref Simple Frontend Configuration for the attribute and elements definition.

Child pages

JAX-WS Configuration

Configuring an Endpoint

Configuring a Client Proxy

Configuring an Endpoint/Client Proxy Using CXF APIs

Configure the JAXWS Server/Client Using Spring