This document provides a detailed description of the MXNet-TensorRT runtime integration feature.  This document covers advanced techniques, contains a roadmap reflecting the current state of the feature and future directions, and also contains up-to-date benchmarks.  If you'd like a quick overview of the feature with a tutorial describing a simple use-case please refer to this MXNet hosted tutorial.  For more information you may also visit the original design proposal page.


Why is TensorRT integration useful?

TensorRT can greatly speed up inference of deep learning models. One experiment on a Titan V (V100) GPU shows that with MXNet 1.2, we can get an approximately 3x speed-up when running inference of the ResNet-50 model on the CIFAR-10 dataset in single precision (fp32). As batch sizes and image sizes go up (for CNN inference), the benefit may be less, but in general, TensorRT helps especially in cases which have:

  • Many bandwidth-bound or latency-bound layers (e.g. pointwise operations) that benefit from GPU kernel fusion.
  • Inference use cases which have tight latency requirements and where the client application can't wait for large batches to be queued up.
  • Embedded systems, where memory constraints are tighter than on servers.
  • When performing inference in reduced precision, especially for integer (e.g. int8) inference.

In the past, the main hindrance for the user wishing to benefit from TensorRT was the fact that the model needed to be exported from the framework first. Once the model got exported through some means (NNVM to TensorRT graph rewrite, via ONNX, etc.), one had to then write a TensorRT client application, which would feed the data into the TensorRT engine. Since at that point the model was independent of the original framework, and since TensorRT could only compute the neural network layers but the user had to bring their own data pipeline, this increased the burden on the user and reduced the likelihood of reproducibility (e.g. different frameworks may have slightly different data pipelines, or flexibility of data pipeline operation ordering). Moreover, since frameworks typically support more operators than TensorRT, one could have to resort to TensorRT plugins for operations that aren't already available via the TensorRT graph API.

The current experimental runtime integration of TensorRT with MXNet resolves the above concerns by ensuring that:

  • The graph is still executed by MXNet.
  • The MXNet data pipeline is preserved.
  • The TensorRT runtime integration logic partitions the graph into subgraphs that are either TensorRT compatible or incompatible.
  • The graph partitioner collects the TensorRT-compatible subgraphs, hands them over to TensorRT, and substitutes the TensorRT compatible subgraph with a TensorRT library call, represented as a TensorRT node in NNVM.
  • If a node is not TensorRT compatible, it won't be extracted and substituted with a TensorRT call, and will still execute within MXNet.

The above points ensure that we find a compromise between the flexibility of MXNet, and fast inference in TensorRT. We do this with no additional burden to the user. Users do not need to learn how TensorRT APIs work, and do not need to write their own client application or data pipeline.

How do I use TensorRT integration?

A full tutorial is provided here but we'll summarize for a simple use case below.

Installation

Installing MXNet with TensorRT integration is an easy process. First ensure that you are running Ubuntu 16.04, that you have updated your video drivers, and you have installed CUDA 9.0 or 9.2. You’ll need a Pascal or newer generation NVIDIA gpu. You’ll also have to download and install TensorRT libraries instructions here. Once your these prerequisites installed and up-to-date you can install a special build of MXNet with TensorRT support enabled via PyPi and pip. Install the appropriate version by running:

To install with CUDA 9.0:

pip install mxnet-tensorrt-cu90


To install with CUDA 9.2:

pip install mxnet-tensorrt-cu92


If you are running an operating system other than Ubuntu 16.04, or just prefer to use a docker image with all prerequisites installed you can instead run:

nvidia-docker run -ti mxnet/tensorrt bash

Model Initialization

import mxnet as mx
from mxnet.gluon.model_zoo import vision
import time
import os

batch_shape = (1, 3, 224, 224)
resnet18 = vision.resnet18_v2(pretrained=True)
resnet18.hybridize()
resnet18.forward(mx.nd.zeros(batch_shape))
resnet18.export('resnet18_v2')
sym, arg_params, aux_params = mx.model.load_checkpoint('resnet18_v2', 0)

Baseline MXNet Network Performance

# Create sample input
input = mx.nd.zeros(batch_shape)

# Execute with MXNet
os.environ['MXNET_USE_TENSORRT'] = '0'
executor = sym.simple_bind(ctx=mx.gpu(0), data=batch_shape, grad_req='null', force_rebind=True)
executor.copy_params_from(arg_params, aux_params)

# Warmup
print('Warming up MXNet')
for i in range(0, 10):
	y_gen = executor.forward(is_train=False, data=input)
	y_gen[0].wait_to_read()

# Timing
print('Starting MXNet timed run')
start = time.process_time()
for i in range(0, 10000):
	y_gen = executor.forward(is_train=False, data=input)
	y_gen[0].wait_to_read()
end = time.time()
print(time.process_time() - start)

TensorRT Integrated Network Performance

# Execute with TensorRT
print('Building TensorRT engine')
os.environ['MXNET_USE_TENSORRT'] = '1'
arg_params.update(aux_params)
all_params = dict([(k, v.as_in_context(mx.gpu(0))) for k, v in arg_params.items()])
executor = mx.contrib.tensorrt.tensorrt_bind(sym, ctx=mx.gpu(0), all_params=all_params,
                                             data=batch_shape, grad_req='null', force_rebind=True)
# Warmup
print('Warming up TensorRT')
for i in range(0, 10):
	y_gen = executor.forward(is_train=False, data=input)
	y_gen[0].wait_to_read()

# Timing
print('Starting TensorRT timed run')
start = time.process_time()
for i in range(0, 10000):
	y_gen = executor.forward(is_train=False, data=input)
	y_gen[0].wait_to_read()
end = time.time()
print(time.process_time() - start)


The output should be the same both when using an MXNet executor and when using a TensorRT executor.  The performance speedup should be roughly 1.8x depending on the hardware and libraries used.

Roadmap

Finished Items

Initial integration has been completed and launched as of MXNet 1.3.  We've tested this integration against a variety of models, including all the gluonCV models, Wavenet and some custom computer vision models.  Performance is roughly in line with expectations, but we're seeing a few regressions over earlier measurements that require investigation.

Continuous Integration support is enabled and running continually for all active PRs opened with MXNet.

PIP packages and Docker images have been published along with the MXNet 1.3 release.

Future work

FP16 Integration

The current integration of TensorRT into MXNet supports only FP32 float values for tensors.  Allowing FP16 values would enable many further optimizations on Jetson and Volta devices.

https://jira.apache.org/jira/browse/MXNET-1084

Subgraph Integration

The new subgraph API is a natural fit for TensorRT.  To help make the codebase consistent we'd like to port the current TensorRT integration to use the new API.  The experimental integration into MXNet requires us to use contrib API calls.  Once integration has moved to use the subgraph API users will be able to use TensorRT with a consistent API.  Porting should also enable acceleration of gluon and module base models.

https://jira.apache.org/jira/browse/MXNET-1085

Conditional Checkout and Compilation of Dependencies

TensorRT integration required us to add a number of third party code sub-repositories to the project.  This is not ideal for users who would like to checkout and build MXNet without using the TensorRT feature.  In the future we should migrate the feature to be CMake only, and checkout the project at pre-compilation time to avoid forcing all users to checkout these subrepos.  We can also model these dependencies using CMake such that they're automatically built and linked against when required, which would make building from scratch easier for those that do want to use TensorRT integration.

Make use of Cached TRT Engines

Similar to the cudnn auto-tuning feature we've received requests from users that we cache TensorRT engine compilations so that we avoid the delay of building the engine each time we start the process.

MXNET-1152 - Getting issue details... STATUS

Increased Operator (/Layer) Coverage

The current operator coverage is fairly limited.  We'd like to enable all models that TensorRT is able to work with. 

MXNET-1086 - Getting issue details... STATUS


Decouple  NNVM to ONNX from NNVM to TensorRT in MXNet

MXNET-1252 - Getting issue details... STATUS

The current nnvm_to_onnx classes are tightly coupled to TensorRT.  We could extract all of the TensorRT specific functionality and have a proper separation between nnvm_to_onnx and onnx_to_tensorrt.  When structuring nnvm_to_onnx we should make use of object hierarchy to convert to specific opsets of onnx to help us maintain compatibility with different toolsets.  We should create a base class that performs generic onnx conversions.  We should then specialized objects that inherit from the base onnx class and take care of the  differences between opsets.  We should also create unit tests on a per-op basis to make sure we're introducing regressions.


Currently supported operators:

Operator NameOperator DescriptionStatus
Convolution
Complete
BatchNorm
Complete

elemwise_add


Complete

elemwise_sub
Complete
elemwise_mul
Complete
rsqrt
Complete
Pad
Complete
mean
Complete
FullyConnected
Complete
Flatten
Complete
SoftmaxOutput
Complete
Activationrelu, tanh, sigmoidComplete


Operators to be added:


Operator NameOperator DescriptionStatus
Deconvolution OpRequired for several Computer Vision models.In Progress
elemwise_divRequired for some Wavenet implementations.In Progress


Benchmarks

TensorRT is still an experimental feature, so benchmarks are likely to improve over time.  As of Oct 11, 2018 we've measured the following improvements which have all been run with FP32 weighted networks.


Model NameRelative TensorRT SpeedupHardware

cifar_resnet20_v2

1.21x

Titan V

cifar_resnext29_16x64d

1.26x

Titan V
Resnet 181.8xTitan V
Resnet 181.54xJetson TX1
Resnet 501.76xTitan V
Resnet 1011.99xTitan V
Alexnet1.4xTitan V


https://mxnet.incubator.apache.org/tutorials/tensorrt/inference_with_trt.html

Runtime Integration with TensorRT