Component

...

Component events are the means by which components are made aware of behaviors by the userTapestry's way of conveying a user's interactions with the web page, such as clicking links and submitting forms.

Component events are used for two purposes:

• They represent requests initiated by the user, triggered by links and forms in the client web browser. These are described more fully in page navigation and in request processing.
• They represent flow-of-control within a request, allowing one component to notify its container about some kind of circumstance ("a form was submitted"), or to collect some piece for data from the container.
  Often, a navigation request (originating with the user) will spawn a number of flow-of-control requests. For example, a Form component will be triggered by an action request, and will then send notification events to announce when the form submission is about to be processed, and whether it was succesful or not.

In Tapestry 4, you would configure a parameter of a component with the name of a method to invoke when a certain event occured, usually a request from the client.

This has some limitations, including the fact that only a single method could be invoked, and that it tied together a component and a method based on a method name, which required careful coordination between the template and the Java code.

Tapestry 5 introduces the concept of event handler methods, identified via a naming convention, or via the OnEvent annotation. Event handler methods may have any visibility, even private. Normally they are given package private visibility, to support testing.

Rather than configure a component to invoke a particular method, you identify one or more methods to listen for events from that component. A single event handler method may receive notifications from many different components.

, to designated methods in your page and component classes. When a component event is triggered, Tapestry calls the event handler method you've provided, if any, in the containing component's class.

Let's look at a simple example. Here's a portion of the template for For example, here's a portion of a page (let's call it "ChooserReview") that lists documents and lets the user choose a number between 1 and 10:a user click to edit any one of them.

<p> Select document to edit

<p> Choose a number from 1 to 10: </p>

<p>
    <t:countloop endsource="10documents" value="indexdocument">
    <div>
    <a    t<t:id=actionlink"select" t:typeid="actionlinkedit" context="index">${index}document.id"> ${document.name} </t:comp>actionlink>       
    </t:count>div>
</p>

The ActionLink component creates an action URL.

t:loop>

Notice that Review.tml contains an ActionLink component in a loop. For each rendering within the loop, the ActionLink component creates a component event request URL, with the event type set to "action". In this case, each URL might look like:

    http://localhost:8080/review.edit/3

This The URL identifies the page that contains the component ("chooserreview"), the type of event (unless it is "action", the default and most common event type), the the Component id of the component within the page ("selectedit"), plus and the additional context value (s).

A sample URL: http://localhost:8080/chooser.select/3Image Removed.

When there are additional context values, they "3", the "id" property of the document). Additional context values, if any, are appended to the path. (The URL may also contain the event name, unless, as here, it is "action".)

There's no direct mapping from URL to a piece of code. Instead, when the user clicks on the link, the ActionLink component triggers events. And then Tapestry ensures that the correct bits of code (your event handler method, see below) get invoked for those events.

This demonstrates a critical difference between Tapestry and a more traditional, action oriented framework. This The URL doesn't say what happens when the link is clicked, it identifies which component is responsible when the link is clicked.

There's no simple mapping from URL to a piece of code; instead the component sends notifications, in the form of invocations of event handler methods, and Tapestry ensures that the correct bit of code, code that you supply, gets invoked.

A Java method can be invoked when the link for the component is clicked by the user:

Often, a navigation request (originating with the user) will spawn a number of flow-of-control requests. For example, a form component may trigger an action event, which will then trigger notification events to announce when the form submission is about to be processed, and whether it was successful or not, and those event could be further handled by the page component.

Event Handler Methods

When a component event occurs, Tapestry invokes any event handler methods that you have identified for that event. You can identify your event handler methods via a naming convention (see Method Naming Convention below), or via the @OnEvent annotation.

@OnEvent(component="edit")
void editDocument(int docId)

  @OnEvent(component = "select")
  void valueChosen(int value)
  {
    this.valueselectedId = valuedocId;
    // do something with the document here
}

Tapestry has done does two things here:

• It has identified method valueChosenBecause of the annotation, it identifies method editDocument() as the method to invoke .whenever the component whose ID is "edit" triggers an event.
• Because there is a method parameter, when the link is clicked It has converted the context value of the request is converted from a string to an integer and passed it into the method.in as the method's value parameter.
  
  

In the above example, the

...

editDocument() method will be invoked

...

when any event occurs in in the "edit" component (and has at least one context value).

Some For some components can emit , more than one type of event can occur, in which case you will want to be more specific:

  @OnEvent(value = "action", component = "selectedit")
  void valueChoseneditDocument(int valuedocId)
  {
    this.valueselectedId = valuedocId;
    // do something with the document here
}

The value attribute of For the OnEvent annotation is , the value attribute identifies the name of the event to match. We specified "action" because the ActionLink component triggers the "action" event, as noted in the Component Events section of its javadocs.

Alternatively, we can use the EventLink component, in which case the name of the event is determined by us – either through the "event" parameter or the element's ID:

<t:eventlink event="delete" context="document.id"> ${document.name} </t:eventlink>

which is equivalent to:

<a t:type="eventlink" t:id="delete" context="document.id"> ${document.name} </a>

Note that if "action" is the name of the default event type; the ActionLink and Form components each use this event type. If you omit the component part of the OnEvent annotation, then you'll recieve receive notifications from all contained components, possibly including nested components (due to event bubbling).As elsewhere, the comparison of event type and component id is caseless.

...

...

...

To support testing, it's a common practice to give event handler methods package-private visibility, as in the examples on this page, although technically they may have any visibility (even private).

A single event handler method may receive notifications from many different components.

As elsewhere, the comparison of event type and component ID is case-insensitive.

...

Method Naming Convention

...

As an alternative to the use of annotations, you may name your events in a specific fashionevent handling methods following a certain convention, and Tapestry will find and invoke your methods just as if they were annotated.

This style of event handler methods start with the prefix "on", followed by the name of the actionevent. You may then continue by adding "From" and a capitalized component id (remember that Tapestry is case insensitive about event names and component ids)IDs). So, for example, a method named onValidateFromSave() will be invoked whenever a "Validate" event is triggered by a component whose component ID is "save".

The previous example may be rewritten as:

Code Block
java language java
void onActionFromSelectonActionFromEdit(int valuedocId) { this.valueselectedId = valuedocId; // do something with the document here }

...

Info
Many people prefer the naming convention approach,

...

reserving the annotation just for situations that don't otherwise fit.

...

Method Return Values

Main Article: Page Navigation

For page navigation events (originating in components such as EventLink, ActionLink and Form), the value returned from an event handler method determines how Tapestry will render a response.

• Null: For no value, or null, the current page (the page containing the component) will render the response.
• Page: For the name of a page, or a page class or page instance, a render request URL will be constructed and sent to the client as a redirect to that page.
• URL: For a java.net.URL, a redirect will be sent to the client. (In Tapestry 5.3.x and earlier, this only works for non-Ajax requests.)
• Zone body: In the case of an Ajax request to update a zone, the component event handler will return the new zone body, typically via an injected component or block.
• HttpError: For an HttpError, an error response is sent to the client.
• Link: For a Link, a redirect is sent to the client.
• Stream: For a StreamResponse, a stream of data is sent to the client
• boolean: true prevents the event from bubbling up further; false lets it bubble up. See Event Bubbling, below.

See Page Navigation for more details.

Multiple Method Matches

In some cases, you there may have be multiple event handler methods match matching a single event. The order is as followsIn that case, Tapestry invokes them in the following order:

• Base class methods before sub-class methods.
• Matching methods within a class in alphabetical order.
• For a single method name with multiple overrides, by number of parameters, descending. There's only rare cases where it makes sense for

Of course, ordinarily would you not want to create more than one method to handle an event.

When a sub-class overrides an event handler method of a base class, the event handler method is only invoked once, along with any other base class methods. The subclass can change the implementation of the base class method via an override, but can't change the timing of when that method is invoked. See TAPESTRYissue TAP5-231151.

Event Context

The context values (the context parameter to the EventLink or ActionLink component) can be any object. However, only a simple conversion to string occurs. (This is in contrast to Tapestry 4, which had an elaborate type mechanism with the odd name "DataSqueezer".)

Again, whatever your value is (string, number, date), it is converted into a plain string. This results in a more readable URL.

If you have multiple context values (by binding a list or array of objects to the ActionLink's context parameter of the EventLink or ActionLink), then each one, in order, will be added to the URL.

When an event handler method is invoked, the strings are converted back into values, or even objects. A ValueEncoder is used to convert between client-side strings and server-side objects. The ValueEncoderSource service provides the necessary value encoders.

As shown in the example above, most of the parameters passed to the event handler method are derived from the values provided in the event context. Each successive method parameter matches against a value provided in the event context (the context parameter of the ActionLink component; though many components have a similar context parameter).

In many cases it is helpful to have direct access to the context (for example, to adapt to cases where there are a variable number of context values). The context values may be passed to an event handler method as parameter of the following types:

• EventContext
• Object[]
• List<Object>

The latter two should be avoided, they may be removed in a future release. In all of these cases, the EventContext parameter acts as a freebie; it doesn't match against a context value as it represents all context values.

Object onActionFromEdit(EventContext context)
{
    if (context.getCount() > 0) {
        this.selectedId = context.get(0);
        // do something with the document here
    } else {
        alertManager.warn("Please select a document.");
        return null;
    }
}

Accessing Request Query Parameters

A parameter may be annotated with the @RequestParameter annotation; this allows query parameters (?name1=value1&name2=value2, etc) to be extracted from the request, converted to the correct type, and passed to the method. Again, this doesn't count against the event context values.

See the example in the Link Components FAQ.

Method Matching

An event handler method will only be invoked if the context contains at least as many values as the method has parameters. Methods with too many parameters will be silently skipped.

Collections

Tapestry will silently skip over a method if there are insufficient values in the context to satisfy the number of parameters requested.

EventContext parameters, and parameters annotated with @RequestParameter, do not count against this limit.

Method Ordering

When multiple methods match within the same class, Tapestry will invoke them in ascending alphabetical order. When there are multiple overrides of the same method name, Tapestry invokes them in descending order by number of parameters. In general, these situations don't happen ... in most cases, only a single method is required to handle a specific event form a specific component.

An event handler method may return the value true to indicate that the event has been handled; this immediately stops the search for additional methods in the same class (or in base classes) or in containing componentsTo designate that an event handler method should be invoked regardless of how many context parameters are available, change the method to accept a single parameter of type Object[], type List, or type EventContext.

Event Bubbling

The event will bubble up the component hierarchy, first to the containing component, then that component's containing component or page, and so on, until it is aborted. The event is aborted when by an event handler method returns returning true or a non-null value.

Returning a boolean value from an event handler method is special. Returning true will abort the event with no result; use this when the event is fully handled without a return value and no further event handlers (in the same component, or in containing components) should be invoked.

Returning false is the same as returning null; event processing will continue to look for more event handlers, in the same component or its parent.

When an event bubbles up from a component to its container, the origin of the event is changed to be the component. For example, a Form component inside a BeanEditForm component may trigger a success event. The page containing the BeanEditForm may listen for that event, but it will be from the BeanEditForm component (which makes sense, because the id of the Form inside the BeanEditForm is part of the BeanEditForm's implementation, not its public interface).

If you want to handle events that have bubbled up from nested component, you'll soon find that you don't have easy access to the component ID of the firing component. In practical terms this means that you'll want to trigger custom events for the events triggered by those nested components (see Triggering Events, below), and use that custom event name in your event handler method.

Event Method Exceptions

Event methods are allowed to throw any exception (not just runtime exceptions). If an event method does throw an exception, Tapestry will catch the thrown exception and ultimately display the exception report page.

In other words, there's no need to do this:

  void onActionFromRunQuery()
  {
    try
    {
      dao.executeQuery();
    }
    catch (JDBCException ex)
    {
      throw new RuntimeException(ex);
    }
  }

Instead, you may simply say:

  void onActionFromRunQuery() throws JDBCException
  {
    dao.executeQuery();
  }

Your event handler method may even declare that it "throws Exception" if that is more convienientconvenient.

Intercepting Event Exceptions

When an event handler method throws an exception (checked or runtime), Tapestry gives the component and its containing page a chance to handle the exception, before continuing on to report the exception.

Tapestry triggers Tapestry fires a new event, of type "exception", passing the thrown exception as the context. In fact, the exception is wrapped inside a ComponentEventException, from which you may extract the event type and context.

Thus:

  Object onException(Throwable cause)
  {
    message = cause.getMessage();

    return this;
  }

The return value of the exception event handler replaces the return value of original event handler method. For the typical case (an exception thrown by an "activate" or "action" event), this will be a navigational response such as a page instance or page name.

This can be handy for handling cases where the data in the URL is misformattedincorrectly formatted.

In the above example, the navigational response is the page itself.

If there is no exception event handler, or the exception event handler returns null (or is void), then then the exception will be passed to the RequestExceptionHandler service, which (in the default configuratonconfiguration) will be render the exception page.

Triggering Events

If you want your own component to trigger events, just call the triggerEvent method of ComponentResources from within your component class.

For example, the following triggers an "updateAll" event. A containing component can then respond to it, if desired, with an "onUpdateAll()" method in its own component class.

@Inject
ComponentResources componentResources;
 ...
private void timeToUpdate() {
    boolean wasHandled = componentResources.triggerEvent("updateAll", null, null);
    if (wasHandled) {
        ...
    }
} 

The third parameter to triggerEvent is a ComponentEventCallback, which you'll only need to implement if you want to get the return value of the handler method. The return value of triggerEvent() says if the event was handled or not.