Dead Letter Channel

Camel supports the Dead Letter Channel from the EIP patterns using the DeadLetterChannel processor which is an Error Handler.

Differences Between The DeadLetterChannel And The DefaultErrorHandler

The DefaultErrorHandler does very little: it ends the Exchange immediately and propagates the thrown Exception back to the caller.

The DeadLetterChannel lets you control behaviors including redelivery, whether to propagate the thrown Exception to the caller (the handled option), and where the (failed) Exchange should now be routed to.

The DeadLetterChannel is also by default configured to not be verbose in the logs, so when a message is handled and moved to the dead letter endpoint, then there is nothing logged. If you want some level of logging you can use the various options on the redelivery policy / dead letter channel to configure this. For example if you want the message history then set logExhaustedMessageHistory=true (and logHandled=true for Camel 2.15.x or older).

When the DeadLetterChannel moves a message to the dead letter endpoint, any new Exception thrown is by default handled by the dead letter channel as well. This ensures that the DeadLetterChannel will always succeed. From Camel 2.15: this behavior can be changed by setting the option deadLetterHandleNewException=false. Then if a new Exception is thrown, then the dead letter channel will fail and propagate back that new Exception (which is the behavior of the default error handler). When a new Exception occurs then the dead letter channel logs this at WARN level. This can be turned off by setting logNewException=false.

Redelivery

It is common for a temporary outage or database deadlock to cause a message to fail to process; but the chances are if its tried a few more times with some time delay then it will complete fine. So we typically wish to use some kind of redelivery policy to decide how many times to try redeliver a message and how long to wait before redelivery attempts.

The RedeliveryPolicy defines how the message is to be redelivered. You can customize things like

Once all attempts at redelivering the message fails then the message is forwarded to the dead letter queue.

About Moving Exchange to Dead Letter Queue and Using handled()

handled() on Dead Letter Channel

When all attempts of redelivery have failed the Exchange is moved to the dead letter queue (the dead letter endpoint). The exchange is then complete and from the client point of view it was processed. As such the Dead Letter Channel have handled the Exchange.

For instance configuring the dead letter channel as:

Using the Fluent Builders

javaerrorHandler(deadLetterChannel("jms:queue:dead") .maximumRedeliveries(3).redeliveryDelay(5000));

Using the Spring XML Extensions

xml<route errorHandlerRef="myDeadLetterErrorHandler"> <!-- ... --> </route> <bean id="myDeadLetterErrorHandler" class="org.apache.camel.builder.DeadLetterChannelBuilder"> <property name="deadLetterUri" value="jms:queue:dead"/> <property name="redeliveryPolicy" ref="myRedeliveryPolicyConfig"/> </bean> <bean id="myRedeliveryPolicyConfig" class="org.apache.camel.processor.RedeliveryPolicy"> <property name="maximumRedeliveries" value="3"/> <property name="redeliveryDelay" value="5000"/> </bean>

The Dead Letter Channel above will clear the caused exception setException(null), by moving the caused exception to a property on the Exchange, with the key Exchange.EXCEPTION_CAUGHT. Then the Exchange is moved to the jms:queue:dead destination and the client will not notice the failure.

About Moving Exchange to Dead Letter Queue and Using the Original Message

The option useOriginalMessage is used for routing the original input message instead of the current message that potentially is modified during routing.

For instance if you have this route:

java from("jms:queue:order:input") .to("bean:validateOrder") .to("bean:transformOrder") .to("bean:handleOrder");

The route listen for JMS messages and validates, transforms and handle it. During this the Exchange payload is transformed/modified. So in case something goes wrong and we want to move the message to another JMS destination, then we can configure our Dead Letter Channel with the useOriginalMessage option. But when we move the Exchange to this destination we do not know in which state the message is in. Did the error happen in before the transformOrder or after? So to be sure we want to move the original input message we received from jms:queue:order:input. So we can do this by enabling the useOriginalMessage option as shown below:

java// will use original body errorHandler(deadLetterChannel("jms:queue:dead") .useOriginalMessage() .maximumRedeliveries(5) .redeliverDelay(5000);

Then the messages routed to the jms:queue:dead is the original input. If we want to manually retry we can move the JMS message from the failed to the input queue, with no problem as the message is the same as the original we received.

OnRedelivery

When Dead Letter Channel is doing redeliver its possible to configure a Processor that is executed just before every redelivery attempt. This can be used for the situations where you need to alter the message before its redelivered. See below for sample.

onException and onRedeliver

We also support for per onException to set an onRedeliver. That means you can do special on redelivery for different exceptions, as opposed to onRedelivery set on Dead Letter Channel can be viewed as a global scope.

Redelivery Default Values

Redelivery is disabled by default.

The default redeliver policy will use the following values:

The maximum redeliver delay ensures that a delay is never longer than the value, default 1 minute. This can happen when useExponentialBackOff=true.

The maximumRedeliveries is the number of re-delivery attempts. By default Camel will try to process the exchange 1 + 5 times. 1 time for the normal attempt and then 5 attempts as redeliveries.
Setting the maximumRedeliveries=-1 (or < -1) will then always redelivery (unlimited).
Setting the maximumRedeliveries=0 will disable re-delivery.

Camel will log delivery failures at the DEBUG logging level by default. You can change this by specifying retriesExhaustedLogLevel and/or retryAttemptedLogLevel. See ExceptionBuilderWithRetryLoggingLevelSetTest for an example.

You can turn logging of stack traces on/off. If turned off Camel will still log the redelivery attempt. It's just much less verbose.

Redeliver Delay Pattern

Delay pattern is used as a single option to set a range pattern for delays. When a delay pattern is in use the following options no longer apply:

The idea is to set groups of ranges using the following syntax: limit:delay;limit 2:delay 2;limit 3:delay 3;...;limit N:delay N

Each group has two values separated with colon:

Lets clarify this with an example:
delayPattern=5:1000;10:5000;20:20000

That gives us three groups:

Resulting in these delays between redelivery attempts:

Note: The first redelivery attempt is 1, so the first group should start with 1 or higher.

You can start a group with limit 1 to e.g., have a starting delay: delayPattern=1:1000;5:5000

There is no requirement that the next delay should be higher than the previous. You can use any delay value you like. For example with delayPattern=1:5000;3:1000 we start with 5 sec delay and then later reduce that to 1 second.

Redelivery header

When a message is redelivered the DeadLetterChannel will append a customizable header to the message to indicate how many times its been redelivered.
Before Camel 2.6: The header is CamelRedeliveryCounter, which is also defined on the Exchange.REDELIVERY_COUNTER.
From Camel 2.6: The header CamelRedeliveryMaxCounter, which is also defined on the Exchange.REDELIVERY_MAX_COUNTER, contains the maximum redelivery setting. This header is absent if you use retryWhile or have unlimited maximum redelivery configured.

And a boolean flag whether it is being redelivered or not (first attempt). The header CamelRedelivered contains a boolean if the message is redelivered or not, which is also defined on the Exchange.REDELIVERED.

Dynamically Calculated Delay From the Exchange

In Camel 2.9 and 2.8.2: The header is CamelRedeliveryDelay, which is also defined on the Exchange.REDELIVERY_DELAY. If this header is absent, normal redelivery rules apply.

Which Endpoint Failed

Available as of Camel 2.1

When Camel routes messages it will decorate the Exchange with a property that contains the last endpoint Camel send the Exchange to:

javaString lastEndpointUri = exchange.getProperty(Exchange.TO_ENDPOINT, String.class);

The Exchange.TO_ENDPOINT have the constant value CamelToEndpoint. This information is updated when Camel sends a message to any endpoint. So if it exists its the last endpoint which Camel send the Exchange to.

When for example processing the Exchange at a given Endpoint and the message is to be moved into the dead letter queue, then Camel also decorates the Exchange with another property that contains that last endpoint:

javaString failedEndpointUri = exchange.getProperty(Exchange.FAILURE_ENDPOINT, String.class);

The Exchange.FAILURE_ENDPOINT have the constant value CamelFailureEndpoint.

This allows for example you to fetch this information in your dead letter queue and use that for error reporting. This is usable if the Camel route is a bit dynamic such as the dynamic Recipient List so you know which endpoints failed.

Note: this information is retained on the Exchange even if the message is subsequently processed successfully by a given endpoint only to fail, for example, in local Bean processing instead. So, beware that this is a hint that helps pinpoint errors.

javafrom("activemq:queue:foo") .to("http://someserver/somepath") .beanRef("foo");

Now suppose the route above and a failure happens in the foo bean. Then the Exchange.TO_ENDPOINT and Exchange.FAILURE_ENDPOINT will still contain the value of http://someserver/somepath.

OnPrepareFailure

Available as of Camel 2.16

Before the exchange is sent to the dead letter queue, you can use onPrepare to allow a custom Processor to prepare the exchange, such as adding information why the Exchange failed.

For example, the following processor adds a header with the exception message:

java public static class MyPrepareProcessor implements Processor { @Override public void process(Exchange exchange) throws Exception { Exception cause = exchange.getProperty(Exchange.EXCEPTION_CAUGHT, Exception.class); exchange.getIn().setHeader("FailedBecause", cause.getMessage()); } }

Then configure the error handler to use the processor as follows:

javaerrorHandler(deadLetterChannel("jms:dead").onPrepareFailure(new MyPrepareProcessor()));

 

Configuring this from XML DSL is as follows:

xml<bean id="myPrepare" class="org.apache.camel.processor.DeadLetterChannelOnPrepareTest.MyPrepareProcessor"/> <errorHandler id="dlc" type="DeadLetterChannel" deadLetterUri="jms:dead" onPrepareFailureRef="myPrepare"/>

 

The onPrepare is also available using the default error handler.

Which Route Failed

Available as of Camel 2.10.4/2.11

When Camel error handler handles an error such as Dead Letter Channel or using Exception Clause with handled=true, then Camel will decorate the Exchange with the route id where the error occurred.

Example:

javaString failedRouteId = exchange.getProperty(Exchange.FAILURE_ROUTE_ID, String.class);

The Exchange.FAILURE_ROUTE_ID have the constant value CamelFailureRouteId. This allows for example you to fetch this information in your dead letter queue and use that for error reporting.

Control if Redelivery is Allowed During Stopping/Shutdown

Available as of Camel 2.11

Before Camel 2.10, Camel would perform redelivery while stopping a route, or shutting down Camel. This has improved a bit in Camel 2.10: Camel will no longer perform redelivery attempts when shutting down aggressively, e.g., during Graceful Shutdown and timeout hit.

From Camel 2.11: there is a new option allowRedeliveryWhileStopping which you can use to control if redelivery is allowed or not; notice that any in progress redelivery will still be executed. This option can only disallow any redelivery to be executed after the stopping of a route/shutdown of Camel has been triggered. If a redelivery is disallowed then a RejectedExcutionException is set on the Exchange and the processing of the Exchange stops. This means any consumer will see the Exchange as failed due the RejectedExcutionException. The default value is true for backward compatibility.

For example, the following snippet shows how to do this with Java DSL and XML DSL:{snippet:id=e1|lang=java|url=camel/trunk/camel-core/src/test/java/org/apache/camel/processor/RedeliveryErrorHandlerNoRedeliveryOnShutdownTest.java}And the sample sample with XML DSL{snippet:id=e1|lang=xml|url=camel/trunk/components/camel-spring/src/test/resources/org/apache/camel/spring/processor/SpringRedeliveryErrorHandlerNoRedeliveryOnShutdownTest.xml}

Samples

The following example shows how to configure the Dead Letter Channel configuration using the DSL{snippet:id=e3|lang=java|url=camel/trunk/camel-core/src/test/java/org/apache/camel/builder/ErrorHandlerTest.java}You can also configure the RedeliveryPolicy as this example shows{snippet:id=e4|lang=java|url=camel/trunk/camel-core/src/test/java/org/apache/camel/builder/ErrorHandlerTest.java}

How Can I Modify the Exchange Before Redelivery?

We support directly in Dead Letter Channel to set a Processor that is executed before each redelivery attempt. When Dead Letter Channel is doing redeliver its possible to configure a Processor that is executed just before every redelivery attempt. This can be used for the situations where you need to alter the message before its redelivered. Here we configure the Dead Letter Channel to use our processor MyRedeliveryProcessor to be executed before each redelivery.{snippet:id=e1|lang=java|url=camel/trunk/camel-core/src/test/java/org/apache/camel/processor/DeadLetterChannelOnRedeliveryTest.java}And this is the processor MyRedeliveryProcessor where we alter the message.{snippet:id=e2|lang=java|url=camel/trunk/camel-core/src/test/java/org/apache/camel/processor/DeadLetterChannelOnRedeliveryTest.java}

How Can I Log What Caused the Dead Letter Channel to be Invoked?

You often need to know what went wrong that caused the Dead Letter Channel to be used and it does not offer logging for this purpose. So the Dead Letter Channel's endpoint can be set to a endpoint of our own (such as direct:deadLetterChannel). We write a route to accept this Exchange and log the Exception, then forward on to where we want the failed Exchange moved to (which might be a DLQ queue for instance). See also http://stackoverflow.com/questions/13711462/logging-camel-exceptions-and-sending-to-the-dead-letter-channel

Using This Pattern