Content

Building Steps (Struts)

Getting ready

1. Create an "Struts 2.x.y omnibus ticket" ticket in JIRA to refer to in upcoming release related commit comments and for general documentation purposes. Mark it with priority "Blocker".
2. Switch to branch develop
3. Ensure that the master POM and Struts Annotations have current releases
4. Review JIRA for any issues without a fix version set, and for any issues that should be resolved for the pending release.
5. Ensure that there are no repositories or pluginRepositories listed in the poms.
6. If you have committed all changes regarding the release process, close the omnibus ticket as it is the last open ticket for the upcoming release
7. Release the upcoming version in JIRA (under Administration/Manage Releases) and tag the release date
8. Add next milestone version to the JIRA roadmap
9. Create DONE and TODO filters for the new version, share with all, and remove obsolete TODO filter
10. Create a new Version Notes page in Confluence, link from Migration Guide, and link to prior release page and JIRA DONE filters of the version to release
11. Export wiki pages and put them under /docs

Update Draft Docs when needed

Checkout struts-site project (see details at the bottom of this page) and perform export:

cd struts-site
mvn package

If build will fail try again - don't use clean, the exporter is going to update only outdated pages. After successful export, commit updated files into struts-production

Be sure your local copy is up-to-date

git fetch origin --prune
git checkout master
git pull

Prepare release

Tag the release by using the "release:prepare" goal of Maven:

mvn release:prepare -DautoVersionSubmodules=true

For a dry run, add -DdryRun=true. If you do a dry run, use mvn release:clean to clean up after you have looked at the output.

When prompted for the SCM tag name, follow this pattern: STRUTS_2_3_[PATCH_VERSION]

Follow the link to get more information about performed operation by release plugin.

Perform the release

mvn release:perform -DretryFailedDeploymentCount=10

Follow the link to get more information about performed operation by release plugin. After this step the artifacts will be hosted by Nexus. The -DretryFailedDeploymentCount=10 is needed when there are problems with network connection (used just in case).

If you need to run perform again, (or in a different box), do:

git checkout STRUTS_2_3_[PATCH_VERSION]
mvn javadoc:javadoc deploy --no-plugin-updates -DperformRelease=true -Papache-release

Next, log in to Nexus and close staging repository.

Move the assemblies

To simplify testing, the assemblies have to be moved to the https://dist.apache.org/repos/dist/dev/struts/$VERSION dir.

After closing repository in Nexus, check if the release files are available from staging repository as bellow:

https://repository.apache.org/content/groups/staging/org/apache/struts/struts2-assembly/$VERSION/

In order to move the assemblies login to people.apache.org and execute the following code:

#!/bin/sh

#create the destination directory
echo "Creating working dir $VERSION"
mkdir $VERSION
cd $VERSION

# get the distro
echo "Getting distro $VERSION"
wget -erobots=off -nv  -l 1 --accept=zip,md5,sha1,asc -r --no-check-certificate -nd -nH https://repository.apache.org/content/groups/staging/org/apache/struts/struts2-assembly/$VERSION

# rename files
echo "Renaming files"
for f in *2-assembly*.zip*
do
 mv $f `echo $f | sed s/2-assembly//g`
done

# remove unneeded files
echo "Removing unneeded files"
for f in struts2-assembly-*.pom*
do
 rm $f
done

# remove unneeded hashes
echo "Removing unneeded files"
rm *.asc.md5
rm *.asc.sha1
cd ..
 
# checking in new version
echo "Pushing test version $VERSION"
svn --no-auth-cache co --depth empty https://dist.apache.org/repos/dist/dev/struts/ struts-dev
mv $VERSION struts-dev/
cd struts-dev
svn add --force ./
svn --no-auth-cache commit -m "Updates test release $VERSION"
cd ..

# cleaning up
rm -r struts-dev

echo "Done!"

After this step artifacts are available for test here https://dist.apache.org/repos/dist/dev/struts/

Announce availability

Send a short e-mail to dev@struts.a.o informing about the new packages and to give people enough time to test the distribution (actual bits). Wait around a week before posting Vote. If no show-stoppers reported, start a vote thread for build quality designation.

Push changes

Do not forget to push your local changes to the Apache repo

git push

Vote on it

Post a release/quality vote to the dev list (and only the dev list). The example mail is on Sample announcements page. If the vote result is for an ASF release (i.e. not test build), update site, announce. If the vote result is for GA, push to central.

Copy files

After the vote, if the distribution is being mirrored (there was a favourable release vote) move all the artefacts from dev folder into release folder:

svn mv https://dist.apache.org/repos/dist/dev/struts/$VERSION/ https://dist.apache.org/repos/dist/release/struts/  

Promote release

Log in again to Nexus and release the repository, it will be automatically replicated across Maven Repositories
See Releasing a Maven-based project for further details.

Clean up old releases

Remove the old files from under https://dist.apache.org/repos/dist/release/struts/ to synchronise only the latest version with peers. All the files from https://dist.apache.org/repos/dist/release/struts/ are always mirrored to http://archive.apache.org/dist/struts/. You can use the below command:

svn del https://dist.apache.org/repos/dist/release/struts/2.3.x/

where x is the previous version to remove (or one more previous to keep current and one version back).

Wait for rsync

Wait 24 hours before proceeding.

Update site

• Check out site src code

  git clone https://git-wip-us.apache.org/repos/asf/struts-site.git
  

• If a new DTD was defined, add it to source/dtds
• Update current version and release date in struts-site/_config.yml
• Update page source files
  • struts-site/source/announce.md (if applicable, refer also to corresponding security bulletin)
  • struts-site/source/downloads.html (Prior Releases section)
  • struts-site/source/index.html (some parts will updated automatically with values defined in _config.yml)
• Generate site with Docker Jekyll image
  • you must have Docker installed and running
  • if you are doing this the first time, download the official Struts image to build the site from https://hub.docker.com/r/theapachestruts/struts-site-jekyll/
  • start docker-machine
  • now you can use one of the bash scripts already provided in the struts-site:
    • docker-run.sh - used with Bash
    • docker-run.fish - to use with Fish Shell (via fish docker-run.fish)
  • now you can check the generated site at http://localhost:4000

• Commit the changes and the generated content

Now the changes must be deployed to production which is basically a separated Subversion repository, you check it out with command below:

svn co https://svn.apache.org/repos/infra/websites/production/struts/content struts-production

It's a good idea to keep that working copy to be used with future releases. Right now copy content of struts-site/content folder to struts-production folder, then commit changes. Next step is to update exported wiki pages. With current approach the pages are kept in struts-production/docs.

Redeploy the docs (Optional)

• Checkout source of the website and export Confluence pages

  svn co https://svn.apache.org/repos/asf/struts/site/trunk struts-site
  cd struts-site
  mvn package

  Now the whole Confluence space is exported to target/cwiki/WW/docs/

• Checkout copy of production website (if you didn't that before)

  svn co https://svn.apache.org/repos/infra/websites/production/struts/content/ struts-production

  (you can checkout just a subtree, but it's better to checkout the whole repo especially when you want to update also the main web page)

• Update production

  cp -r struts-site/target/cwiki/WW/docs/* struts-production/docs/
  cd struts-production
  svn commit "Updates production"

Post announcements

We leave this as the last step, once the artifacts have had time to sync up on the mirrors. Target it to: user@struts.a.o, announcements@struts.a.o and  announce@a.o, samples are available at Sample announcements page